1981 - 1982 SUZUKI GS 650
swingarm
| 1 | REAR SWINGING ARM SET | Unavailable | |
|---|---|---|---|
| 1 | 61100-34850-13L REAR SWINGING ARM SET | Unavailable | |
| 2 | ROLLER BEARING BEARING | Unavailable | |
| 3 | 61213-34300-000 DISCONTINUED | Unavailable | |
| 4 | NUT | Unavailable | |
| 5 | CAP DISCONTINUED | Unavailable | |
| 6 | REORDER ROBINSONS MOTORS BOOT, DRIVE SHAFT | Unavailable | |
| 7 | CLAMP CLAMP SHAFT BOOT | Unavailable | |
| 8 | SCREW | Unavailable | |
| 9 | SPRING PROPELLER SHAFT BOOT SPRING | Unavailable | |
| 10 | BOLT .BOLT 8X25 | Unavailable | |
| 11 | SHOCK ABSORBER, REAR | Unavailable | |
| 11 | SHOCK ABSORBER, REAR | Unavailable | |
| 12 | NUT NUT, UPPER | Unavailable | |
| 13 | WASHER WASHER, INNER (12.5*24*2.3) | Unavailable | |
| 14 | WASHER WASHER, OUTER (10.5*24*2.3) | Unavailable | |
| 15 | BOLT, LOWER RH | Unavailable | |
| 16 | WASHER WASHER (12.5X24X1.6) | Unavailable | |
| 17 | WASHER | Unavailable | |
| 18 | WASHER WASHER, INNER (12.5*24*2.3) | Unavailable | |
| 19 | WASHER WASHER, OUTER (10.5*24*2.3) | Unavailable | |
| 20 | NUT NUT REFER TO FIG.65 (J-3) FOR MODE REFER TO FIG.66 (J-4) FOR MODE | Unavailable | |
| 21 | LINK REAR TORQUE DISCONTINUED | Unavailable | |
| 22 | BOLT FRONT TORQUE LINK BOLT | Unavailable | |
| 23 | Bolt 10x39 | ||
|
10d.
|
$5.06
$5.62
-10%
|
||
| 24 | WASHER WASHER, LOWER LH | Unavailable | |
| 25 | NUT 10 MM CASTLE NUT | Unavailable | |
| 26 | COTTER PIN, ROD END | Unavailable | |